- Tantum
- Tantum X
Tantum Protection - Tantum Supershine for all firm surfaces in the interior and outside area. Apply or spray on a previously fat-free cleaned surface (Permanon Pre-cleaner or Permanon shampoo Two in One) a 5% (1:20) solution of Permanon Tantum Supershine on the surface to be protected. Subsequently remove the product excess through rinsing, and dry afterwards
Tantum Protection -Tantum X Tantum Shampoo 2 in 1 for the cleaning and care of varnished and metallic surfaces, glass and plastics. Offers a long lasting, extremely resistant and at the same time material conserving surface protection. Apply with a 2-5% cleaning solution on the surface to be treated with a sponge, cloth or brush, then thoroughly rinse and dry.Pulling arrows made easy – 60% power saving and saves the cleaning of the arrows; maintains all bows - from wood bow to Compound.
It is a pure natural product and absolutely environmentally friendly. It does not contain solvents or alcohol and does NOT damage the arrows! The product does not undergo a durable connection with the arrows and must be refreshed after approx. 30 shots.The follow-up cleaning alleviates up to 80%.
The arrows become noticeably smoother and let themselves pull more easily out of the disk. The life-span of the arrows is clearly increased. The Archer saves energy for the perfect aim. ALL types of arrows can be treated with TANTUM without hesitation. Surfaces and Fletches receive an impregnation against moisture without being weighted/encumbered. This means always uniform flight characteristics.
With TANTUM arrows and bow surfaces receive UV-protection and are protected against corroding as well as a protection against moisture. Therewith the value of the sports equipment is preserved.
Other PERMANON PRODUCTS are not suitable for the coating of arrows.
Application areas:
News Arrow Shafts, Fletching, Cable Conductor, Limbs, Centrepiece, complete bows
Interoperability table:
Before the first-time use, the arrows should be cleaned thoroughly (fat-free). Best with Aceton or alcohol. In order to improve the adhesive properties of the product on the arrows, it is advisable to wipe the arrows with a cloth with vinegar essence (light acid). Subsequently thinly apply the fluid with a Micro-fabric cloth and let dry-on for 1 minute. Finally re-wipe with a Micro-fabric cloth. Done!
To refresh the coating it is sufficient to clean the arrows previously only with water and soap. Then reapply the product or use a soaked cloth and then re-wipe with a Micro-fabric cloth.
