Diamond

Diamond

Diamond seals your surfaces and protects them against contamination.

Diamond has been especially developed for the use on transparent/semi-transparent surfaces. Diamond ready-to-use solution can be relied upon for nearly any surface sealing that needs to be done. A clean, grease-free surface suffices. This highly developed and balanced product causes excellent adhesion to the material to be maintained and protected. 

The product contains silicium and special water-based maintenance substances. 

As a result of the treatment with Diamond the surface becomes even smoother and dirt has no chance of sticking, as it formerly was the case when the surface was rough. The product does not contain alcohol as a carrier substance, nor does it contain flour silanes or chemical silicon oils as solvents. Diamond is non-toxic; silicium adheres electrostatically to surfaces creating a long lasting protection film. 

Diamond 2 in 1

In addition to the functional properties described in detail for Diamond, Diamond 2 in 1 offers an excellent cleansing effect. Thus, surfaces are cleaned and sealed in one step. Costs are saved and maintenance measures need to incur less frequently. Surfaces which formerly had to be maintained and cleaned repeatedly can now be treated at larger intervals thanks to Permanon Diamond 2 in 1. The application procedure is just the same as described in detail for Diamond. 

Permanon Diamond demonstrates its outstanding properties in the following areas:

  • private household with glass
  • facility management
  • mirror & glass cleaner
  • industry and robotics
  • automation systems 
  • restaurants and hotels
  • sweet & salt water vessels
  • schools and government agencies 
  • machine & vehicle maintenance
  • fitness equipment
  • winter gardens
  • green houses
  • nursing homes

Quick and thorough cleaning made easy

Prior to application thoroughly clean and free of grease the surface to be protected, then apply or spray on the surface a 2% solution. Remove excess product, rinse or dry. The high-gloss effect is boosted when the surface is dried with a microfiber cloth. Compared to competitor products Permanon is simple in use as it cleans and protects in one step. This gives you brilliant shine and protection. Moreover, follow-up maintenance/cleaning become easier more than 80%.

Dosage:

  • First-time application: mix PERMANON (2-3%) with water.
  • For shine-renewing a 2% solution is sufficient.

Important note:

  • After mixing with normal tap water the application solution is stable for about three weeks.
  • 1 liter concentrate produces 50 liters of ready-to-use solution at a concentration of 2%.

Concentrate or Ready to use:

Permanon products are highly concentrated and, therefore, must be diluted before use with water. Ready to use products, however, are prefabricated solutions immediately ready for use, which are not available in the Gold line

Concentrate 100% pur

All Permanon products are concentrates and are mixable with regular tap water at 3-5%. This means 3% that is 30 ml must be taken from the concentrate and must be diluted with 1.000 ml water. A mixing rate of 2% equals 500ml which produces about 25 liters ready-to-use solution. Important: the solution freshly prepared with tap water is stable for about three weeks.

Surface protection at a glance

  • Solar

  • Diamond

  • Super Matte

  • On request

  • Yacht

  • Aircraft

Contact us

Permanon GmbH Germany
Tel.        +49(0)7567-1563
Fax.:       +49(0)7567-1031
E-Mail:  Please click here

Distribution network
World fairs
ISSA Member
SEMA Member 
ISO Certification

Iso Certification